This 3 axis gyroscope is perfect for FPV head tracking, robotics, movement control and more...

 

It allows you to track the movement of the head or arm and convert it in analog signals outputs, exactly like a potentiometer. Like other versions of the mhpro.net's Gyroscopes, it can be configured as normal or reverse action mode. For Do It Yourself (DIY) home project lover who dreams of doing a movement tracking system himself. This system has been specially designed for DIY in electronics or robotics for all ages; people who want to explore electronics and want their own system, but are less comfortable with advanced programming of accelerometers. You can use one or more axes (X, Y, Z) independently. According to your needs.

 

 

 

To be more technical

The gyroscope outputs analog signals: 0 to input power voltage (5-12 volts) or 0 - 3.3 volts. Your choice. And independently for each axis. When turning on, the X and Y axis will output 2,5 volts (in case of 5 volts input) and will tend to 0 volt if you rotate the gyroscope one way (-90 degree) and tend to 5 volts the other way (90 degrees). The Z axis will do the same but with +- 180 degrees of rotation.

Other new features

  • Unique connector for all wires. Easier to connect power and signals with this small pre wired connector. Included with the new version.
  • I added an optional connection in case of you need a remote centering button.

 

Limitation: The gyro outputs must be connected to the input ports of your hardware. They can not drive LEDs or others directly.

 

Download datasheet

Write a review

Note: HTML is not translated!
    Bad           Good

3 axis gyroscope that act as potentiometer (analog outputs)

  • Brand: mhpro.net
  • Product Code: Iota LPF
  • Availability: In Stock
  • 75.00$ CAD

Related Products

 Microcontroller Arduino Compatible Pro Mini ATMEGA328P 5V/16M

Microcontroller Arduino Compatible Pro Mini ATMEGA328P 5V/16M

Pro Mini

Technical data: 14x Digital input/Output Port Rx, TX, D2~D13, 8x Analog input Ports A0~A..

9.00$ CAD

3 axis gyroscope sensor - Iota V2

3 axis gyroscope sensor - Iota V2

Iota v2

Gyroscope sensor for FPV, robotique and more... As seen on KickStarter. Over 1200% funded, 260 ba..

40.00$ CAD 48.00$ CAD

 Microcontroller Arduino Compatible Pro Micro ATmega32U4

Microcontroller Arduino Compatible Pro Micro ATmega32U4

Pro Micro

Description: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The US..

12.00$ CAD

Custom electronic development

Custom electronic development

Bank of hours for electronic development If you need help with your project or if you have an ide..

42.00$ CAD

3 axis wireless gyroscope - Zita V2

3 axis wireless gyroscope - Zita V2

Zita V2

Here is the new version of the wireless 3 axis gyroscope! Perfect for FPV head tracking, robotics..

75.00$ CAD 85.00$ CAD

Programmation

Programmation

Bank of hours for microcontroller programming (Arduino type) If you need help with your project o..

42.00$ CAD

PCB design service

PCB design service

Bank of hours for PCB design Experienced PCB designer offer his service for your project to come ..

42.00$ CAD